{"title":"Rob Cosman Tools","description":"\u003cp\u003eO'Connor Woodworking is a proud supplier of the Rob Cosman Tool line. Rob is a world class woodworker and his tools are second to none. They are designed with over 50 years of woodworking experience and Made in Canada.\u003c\/p\u003e","products":[{"product_id":"rob-cosman-dovetail-saw","title":"Rob Cosman Dovetail Saw","description":"\u003cp\u003eAfter teaching thousands of students to cut dovetails by hand and dealing with the problems they had when using traditional dovetail saws, I decided to design and build a dovetail saw to solve these problems.\u003c\/p\u003e\n\u003cp\u003eMy Rob Cosman Dovetail Saw is the best saw for dovetails and is designed for rip sawing that leaves a smooth, ready-to-glue, finished surface.\u003c\/p\u003e\n\u003cp\u003eI designed my dovetail saw with a .020\" thin blade, 22 tpi starting teeth and 15 tpi sawing teeth, filed rip, with a minimal 2000th inch (0.002) set per side. The relaxed cutting angle of the small front teeth allows you to start the cut with ease - a major issue with other saws!  The teeth, formed with a diamond-saw, slice cleanly and precisely through wood fibers.  The minimal set creates a small kerf that guides the saw straight in the crosscut while the shallow 1-5\/8 inch depth of blade (tooth-line to brass back) helps with stability while sawing to a line. The pistol grip handle conforms to your hand for a perfect, repeatable fit every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize.\u003c\/strong\u003e Overall length (Toe to Handle tip): 15 - 1\/8 inches.  Blade length (Toe to heal): 10 inches. Depth of plate under the back: 1 - 5\/8 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 22-24 ounces. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade\u003c\/strong\u003e. Each of our dovetail saw blades is made from .020 Inch thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry.\u003c\/strong\u003e  Filed rip with a two-stage pitch. The first two inches of each dovetail saw is filed at 22 teeth per inch (TPI) and a 30 degree negative tooth rake, which allows you to easily start a cut. The rest of the blade is filed at 15 tpi and a 5 degree tooth rake allowing you to finish the cut with just a few strokes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet.\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with a diamond saw.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .024 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready-to-glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back:\u003c\/strong\u003e Rob Cosman dovetail saws have a 1\/4″ thick x 7\/8″ wide brass back secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful but it imparts extra weight to the saw, as compared to other saws, that provides you a better balanced saw, allows the saw to do the cutting work, and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle.\u003c\/strong\u003e Our unique \"pistol grip\" handles have memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back.  Our handles are made from Richlite \u003cspan\u003ean incredibly durable, sustainable, and versatile material made from High-grade FSC-certified paper infused with a thermosetting resin\u003c\/span\u003e.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e Our handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141342437456,"sku":"","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/BE9C40E7-BB2E-45FD-A6CA-31465B94F482.jpg?v=1743820297"},{"product_id":"rob-cosman-dovetail-saw-3-4","title":"Rob Cosman Dovetail Saw 3\/4","description":"\u003cp\u003eCutting tiny dovetails (dovetails in 3\/8 inch and less thick stock) is a bit challenging if using my regular sized dovetail saw - it can be done, but I wanted a better saw for this application.  That is why I designed my 3\/4 dovetail saw.   As compared to my regular-sized dovetail saw, the 3\/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall length, makes cutting tiny dovetails a breeze.\u003c\/p\u003e\n\u003cp\u003eMy 3\/4 Dovetail Saw is perfect for small box makers, cutting joints in small drawers, and anytime you are rip cutting 3\/8 inch or less stock.  My 3\/4 Dovetail Saw is the best saw on the market for rip sawing tiny joinery.  And just like our regular-sized dovetail and Joinery saws, it leaves a smooth, ready-to-glue, finished surface.\u003c\/p\u003e\n\u003cp\u003eI designed my 3\/4 Dovetail saw with a thin .015 inch blade; 22 teeth per inch (TPI), filed rip along the entire tooth line; and a minimal .002 inch set per side. The relaxed cutting angle of the small front teeth allows you to start the cut with ease - a major issue with other saws!  The teeth, cut with a diamond-saw, slice cleanly and precisely through wood fibers.  The minimal set creates a small .019 inch sized kerf that guides the saw straight in the cut while the shallow 1-3\/16 inch depth of blade (tooth-line to brass back) helps with stability while sawing to a line. The pistol grip handle conforms to your hand for a perfect, repeatable fit every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize.\u003c\/strong\u003e Overall length (Toe to Handle tip): 13-1\/2 inches.  Blade length (Toe to heal): 8 inches. Depth of plate under the back: 1-3\/16 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.50 ounces (+\/- 0.5 ounces). \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade\u003c\/strong\u003e. Each of our 3\/4 Dovetail Saw blades are made from .015 inch thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry.\u003c\/strong\u003e  Filed rip with a two-stage pitch. The first 1-1\/2 inches is filed at 22 teeth per inch (TPI) with a 30 degree negative tooth rake, which allows you to easily start a cut. The rest of the blade is filed at 22 TPI with a 0 degree tooth rake allowing you to finish the cut with just a few strokes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet.\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with a diamond saw.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .019 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready-to-glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back:\u003c\/strong\u003e Rob Cosman dovetail saws have a 1\/4 inch thick x 3\/4 inch wide brass back secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful but it imparts extra weight to the saw providing you a better balanced saw, allows the saw and gravity to do the cutting work, and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle.\u003c\/strong\u003e Our unique \"pistol grip\" handle has memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back.  Our 3\/4 Dovetail Saw handles are available in Swanstone, a resin-composite material reinforced with glass for durability.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e Our handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141374287952,"sku":"","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/2B7F04B9-96C1-4B91-BBFF-F38355B273E9.jpg?v=1743821202"},{"product_id":"rob-cosman-joinery-crosscut-saw","title":"Rob Cosman Joinery Crosscut Saw","description":"\u003cdiv id=\"shopify-section-template--18226069274802__product_tabs_CPR6Ma\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"product__container\"\u003e\n\u003cdiv class=\"product-tabs\" data-design=\"tabs\"\u003e\n\u003cdiv class=\"contents\"\u003e\n\u003cdiv class=\"tab\"\u003e\n\u003cdiv class=\"product-single__description rte\"\u003e\n\u003cp\u003eEvery hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. I designed and manufacture two different Crosscut Saws: my Joinery Crosscut and my Bench Crosscut to meet this requirement. \u003c\/p\u003e\n\u003cp\u003eBoth of my crosscut saws are specialized for crosscutting applications.  My Joinery Crosscut Saw is designed for making finished, ready-to-glue joinery cuts.  My Bench Crosscut Saw is designed for general cross cutting tasks.\u003c\/p\u003e\n\u003cp\u003eI designed my Joinery Crosscut Saw with a thin .020 inch blade,  fine 15 tpi teeth filed crosscut, and a minimal .002 inch set per side.  The teeth, cut with a diamond-saw, slice cleanly and precisely through cross-grain wood fibers.  \u003c\/p\u003e\n\u003cp\u003eThe minimal set creates a small kerf that guides the saw straight in the crosscut while the shallow 1-5\/8 inch depth of blade  (tooth-line to brass back) helps with stability while sawing to a line. The pistol grip handle conforms to your hand for a perfect, repeatable fit every time. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Overall length (Toe to handle tip): 15-1\/8 inches.  Blade length (Toe to heal): 10 inches.  Depth of blade under the back: 1-5\/8 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 ounces. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e Made from .020\" thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry:\u003c\/strong\u003e Filed crosscut at 15 teeth per inch (TPI) and a 0 degree tooth rake.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet:\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with a diamond saw.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .024 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready to glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back:\u003c\/strong\u003e The brass back is 1\/4″ thick x 7\/8″ wide and is secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful  it imparts extra weight to the saw providing you a better balanced saw.  This enables  the saw to do the cutting work and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e Each of our \"pistol grip\" handles have memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back.  Our handles are made from Richlite, \u003cspan\u003ean incredibly durable, sustainable, and versatile material made from High-grade FSC-certified paper infused with a thermosetting resin\u003c\/span\u003e. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e \u003cspan\u003eOur handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"bundler-target-element\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141375205456,"sku":"","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/1E25E4CD-B31B-46BE-920D-FCD3069615BD.jpg?v=1743820733"},{"product_id":"rob-cosman-joinery-crosscut-saw-3-4","title":"Rob Cosman Joinery Crosscut Saw 3\/4","description":"\u003cp\u003eCutting crosscuts in very small stock, can be challenging with our regular-sized Joinery Crosscut saw.  It can be done, but I wanted a better saw for this application.  That is why I designed my 3\/4 Joinery Crosscut saw.   As compared to my regular-sized Joinery Crosscut, the 3\/4 Joinery Crosscut Saw has a thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall length, which makes delicate crosscuts a breeze.\u003c\/p\u003e\n\u003cp\u003eMy 3\/4 Joinery Crosscut Saw is perfect for cutting tiny miters, very small tenon shoulders, the shoulders of tiny tail boards, or anytime you are crosscutting 3\/8 inch thick or less stock.  Like our regular-sized Joinery Crosscut Saw, the 3\/4 Joinery Crosscut saw leaves a smooth, ready-to-glue, finished surface.\u003c\/p\u003e\n\u003cp\u003eI designed my 3\/4 Joinery Crosscut saw with a thin .015 inch blade; 22 teeth per inch (TPI), filed crosscut along the entire tooth line; and a minimal .002 inch set per side.  The teeth, cut with a diamond-saw, slice cleanly and precisely through wood fibers.  The minimal set creates a small .019 inch sized kerf that guides the saw straight in the cut while the shallow 1-3\/16 inch depth of blade (tooth-line to brass back) helps with stability while sawing to a line. The pistol grip handle conforms to your hand for a perfect, repeatable fit every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize.\u003c\/strong\u003e Overall length (Toe to Handle tip): 13-1\/2 inches.  Blade length (Toe to heal): 8 inches. Depth of plate under the back: 1-3\/16 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.50 ounces (+\/- 0.5 ounces). \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade\u003c\/strong\u003e. Made from .015 inch thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry.\u003c\/strong\u003e  Filed crosscut with 22 TPI with a 0 degree tooth rake allowing you to finish the cut with just a few strokes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet.\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with a diamond saw.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .019 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready-to-glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back:\u003c\/strong\u003e Rob Cosman’s 3\/4 Joinery Crosscut saws have a 1\/4 inch thick x 3\/4 inch wide brass back secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful but it imparts extra weight to the saw providing you a better balanced saw, allows the saw and gravity to do the cutting work, and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle.\u003c\/strong\u003e Our unique \"pistol grip\" handle has memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back.  Our 3\/4 Joinery Crosscut Saw handles are available in Swanstone, a resin-composite material reinforced with fiberglass for durability.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e Our handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141375795280,"sku":"","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/9400346C-7574-4631-B326-ACF4060D83FA.jpg?v=1743821414"},{"product_id":"rob-cosman-s-ibc-bench-chisel","title":"Rob Cosman’s IBC Bench Chisel","description":"\u003cdiv\u003e\n\u003cp\u003eDetermined to design a better bench chisel, IBC and I teamed up and developed what I consider to be the best woodworking bench chisel on the market today.  These chisels meet all five criteria of a great bench chisel: comfortable, high quality steel, bevel on the side with a small flat, flat back, and the ability to change handles.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e  Bench chisel handle length: approximately 3.9 inches. Bench chisel total length: approximately 9 inches. Bench chisel blade length, including the tang is approximately 6 inches. Blade widths available: 1\/4, 3\/8, 1\/2, 5\/8, 3\/4, 1 inch.\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCherry handle is turned precisely on a lathe so it fits nicely to the ferrule and the end cap and have a butter smooth surface.  Shaped for a comfortable grip in the hand, they are finished with three coats of oil.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSteel\u003c\/strong\u003e:  Made from AISI High Vanadium A2 tool which holds an edge beautifuy.  Fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 HRC.  Primary bevel is ground to 25°. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFlat Back. \u003c\/strong\u003e Each chisel is tested on a granite reference surface to ensure the back is flat to within .0005 of an inch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe blade tang extends through a hardened steel ferrule and into a threaded hardened steel core that is inserted through the center of the wood handle and is securely attached to an aluminum striking cap.  This design allows you to easily replace the standard cherry handle with your own custom turned wood handle. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in Canada\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"1\/4”","offer_id":41141381988432,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"3\/8”","offer_id":41141382021200,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"1\/2”","offer_id":41141382053968,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"5\/8”","offer_id":41141382086736,"sku":null,"price":119.0,"currency_code":"USD","in_stock":false},{"title":"3\/4”","offer_id":41141382119504,"sku":null,"price":119.0,"currency_code":"USD","in_stock":false},{"title":"1”","offer_id":41141382152272,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/3865CF2A-F633-43E9-9F4D-A507FD05B3E6.jpg?v=1743820921"},{"product_id":"rob-cosman-s-ibc-17-degree-bench-chisel","title":"Rob Cosman’s IBC 17 Degree Bench Chisel","description":"\u003cp\u003eIf you have ever chopped out waste in softer woods (Pine, Cedar, Aspen, Poplar, etc) then you have felt the frustration of the wood fibers collapsing and tearing out in big chunks with typical bench chisels ground at 25-30 degrees.  I fixed this problem by grinding a more acute bevel on an IBC chisel specifically for chopping out waste in softer woods.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChop waste in soft woods without chunks tearing out.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e17 degree primary bevel cleanly slices through soft wood fibers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in custom turned cherry handle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e  Bench chisel handle length: approximately 3.9 inches. Bench chisel total length: approximately 9 inches. Bench chisel blade length, including the tang is approximately 6 inches. Blade widths available: 1\/4, 1\/2 inch.\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCherry handle is turned precisely on a lathe so it fits nicely to the ferrule and the end cap and have a butter smooth surface.  Shaped for a comfortable grip in the hand, they are finished with three coats of oil.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSteel\u003c\/strong\u003e:  Made from AISI High Vanadium A2 tool which holds an edge beautifuy.  Fully stress relieved, triple tempered, cryogenically treated and hardened to 60-62 HRC.  Primary bevel is ground to 17°. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFlat Back. \u003c\/strong\u003e Each chisel is tested on a granite reference surface to ensure the back is flat to within .0005 of an inch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe blade tang extends through a hardened steel ferrule and into a threaded hardened steel core that is inserted through the center of the wood handle and is securely attached to an aluminum striking cap.  This design allows you to easily replace the standard cherry handle with your own custom turned wood handle. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in Canada\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"1\/4”","offer_id":41141388017744,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"1\/2”","offer_id":41141388050512,"sku":null,"price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/244119C1-0303-4400-81F2-DCDE88C08C41.jpg?v=1743821756"},{"product_id":"rob-cosman-s-ibc-half-blind-chisel","title":"Rob Cosman’s IBC Half Blind Chisel","description":"\u003cp\u003eIf you have ever cut a half-blind dovetail then you know how challenging cleaning out the pin socket is, especially in the corners.  Not happy with the skew and fishtail chisels available, I designed and made my own half-blind chisel and they work great!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThese chisels are made from our Rob Cosman IBC bevel edge chisels with custom fit cherry handles. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eHas a 13\/16 inch cutting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDovetail-shape makes accessing the back corners of the half-blind socket easy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSides of the chisel tip are angled to easily fit into the corners of the half-blind socket.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne chisel does both corners verses a left and right set of skew chisels.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePushing through endgrain is tough; unlike skew chisels, our half-blind chisels keeps your line of force straight making it easier to push through the endgrain.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMy students love them!  Try it once and you will never want to cut half-blind dovetails without it.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"3\/8”","offer_id":41141515944016,"sku":null,"price":159.0,"currency_code":"USD","in_stock":false},{"title":"5\/8”","offer_id":41141515976784,"sku":"","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/A90012A4-439C-4172-BA6F-6FF3059C0562.jpg?v=1743867666"},{"product_id":"rob-cosman-s-marking-gauge","title":"Rob Cosman’s Marking Gauge","description":"\u003cp\u003eThe second most important tool in cutting dovetails is your marking gauge.  The gauge line becomes part of the finished joint.  Here is why I think my marking gauge will help you cut better dovetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe blade comes to you sharpened; designed to sever the wood fibers not crush them, leaving a crisp gauge line.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe blade is fixed in use but can be rotated to a sharper area when it gets dull.  You can do this several times before having to resharpen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHas a flat section on the brass head preventing the gauge from rolling off of your bench.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe face of the head is dead flat, making for precise work.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHas a large knurled locking knob that is easy to tighten.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eComes standard with the 1\/2\" diameter cutter head.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExtra cutter heads available in 3\/8\", 7\/16\", and 5\/8\" diameters.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141611003984,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/0D1223AF-3424-4311-92AE-81BFC79FF8F3.jpg?v=1743873691"},{"product_id":"rob-cosman-s-mallet","title":"Rob Cosman's Mallet-Regular","description":"\u003cp\u003eI prefer a carver’s style mallet for chisel work.  With properly sharpened chisels, a medium weight mallet does the job without excessive fatigue to the craftsman. \u003c\/p\u003e\n\u003cp\u003eEarly mallets I owned had smooth lacquered handles that had to be held tightly to prevent them from slipping.  A long day of chopping mortises or dovetails would leave my hand and wrist sore.  My solution was to tape the handle with sports tape like a hockey stick.  This allows me to use a relaxed grip with a lot less fatigue. \u003c\/p\u003e\n\u003cp\u003eWe use resin impregnated maple heads, making for a very tough head that will give you years of use.  I think you will be pleasantly surprised at how comfortable my mallet is over the course of a long day in the shop.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eResin impregnated Maple heads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe handle is inserted through the head, and is glued and screwed in place with two #12 by 1-1\/2\" coarse threaded screws that straddle the joint line.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe regular mallet head is 4 inches long. The resin impregnated maple head is turned on a lathe until it meets our desired weight standards; thus, the diameter measurement can vary slightly from mallet to mallet.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e The overall length of the regular mallet with the handle attached is 9-1\/2 inches long.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003c\/div\u003e\nThe overall weight of the regular mallet with handle is between 350 (12.3 oz) and 400 grams (14.1 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHandle shape and hockey grip tape make it comfortable to hold with a relaxed grip.  We tape the handle for you.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSlight taper of the head improves the striking angle of the head.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141762916432,"sku":null,"price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/FEA116C3-324A-4551-B1EF-49B6D306EE3F.jpg?v=1743903853"},{"product_id":"rob-cosman-s-shooting-board","title":"Rob Cosman's Shooting Board","description":"\u003cp\u003eIn my shop the shooting board is standard equipment.  Once you learn to sharpen and use a hand plane, a good shooting board will do more to increase the accuracy of your work than any other tool or shop implement.  Here is why mine works so well:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade with an MDF base and a Baltic Birch plywood top for stability and long wearing properties.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFormed over a curved mold, the board has a subtle cup on the underside, this keeps the plane standing plumb.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence and cleat made from abuse-resistant and tough tropical hardwood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence glued and screwed to stay secure and square.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRabbet cut in Baltic birch to prevent plane from cutting shooting board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence positioned several inches from the rear to keep plane running straight.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in left and right hand models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in two sizes, 24\" x 12\" and 18\" by 12\".\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you prefer to buy rather than build, let us send you one that is ready to use.\u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"24”x12”","offer_id":41141763014736,"sku":null,"price":199.0,"currency_code":"USD","in_stock":false},{"title":"18”x12”","offer_id":41141763047504,"sku":"","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/674ED83B-94DB-4790-9F6F-98218C16356F.jpg?v=1743904331"},{"product_id":"rc-mitered-shooting-board","title":"Rob Cosman's Mitered Shooting Board","description":"\u003cp\u003eIf you do flat miter work then you know how difficult it can be to join two miters and get a perfect 90 degree right angle.  My mitered shooting board enables you to create perfect 45 degree miters for that perfect 90 degree joint.  Here is why my mitered shooting board works so well: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade with an MDF base and a Baltic Birch plywood top for stability and long wearing properties.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFormed over a slightly curved mold; the board has a subtle cup on the underside, this keeps the plane standing plumb.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence and cleat are made from abuse-resistant and tough tropical hardwood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence glued and screwed to stay secure and at a perfect 45 degrees to the plane.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eFence does not extend across the entire width of board allowing you to grasp both edges of your stock as it extends past the fence giving you positive control of the stock feed rate into the plane.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e180 grit emory cloth is adhered to the fence to keep your stock from slipping during the cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eA small rabbet is cut in the Baltic birch to prevent the blade from cutting the shooting board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe fence is positioned several inches from the forward edge to keep the plane running straight after cutting your stock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in left and right hand models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Right Handed","offer_id":41141763145808,"sku":"","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Left Handed","offer_id":41141763178576,"sku":null,"price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/6F070178-54BB-441E-8139-2D2EF26C5B14.jpg?v=1743904936"},{"product_id":"rob-cosman-s-mini-shooting-board","title":"Rob Cosman’s Mini Shooting Board","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSometimes a full size shooting board is too big for the task, but our mini shooting board is just right.  Designed to be used with a block plane, this mini shooting board is great at squaring up smaller pieces of wood.  If you make boxes this is a MUST have.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 12 inches long x 8 inches wide. Running surface is 1-1\/2 inches wide.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in Left and right handed versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMade with an MDF base and a Baltic Birch plywood top for stability and long wearing properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFormed over a curved mold, the board has a subtle cup on the underside, this keeps the plane standing plumb.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence made from an abuse-resistant and tough, tropical hardwood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCleat is made from a domestic hardwood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence and cleat are glued and screwed to stay secure and square.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRabbet cut in Baltic birch to prevent plane from cutting shooting board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFence positioned several inches from the rear to keep plane running straight.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Right Handed","offer_id":41141763506256,"sku":"","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Left Handed","offer_id":41141763539024,"sku":"","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/BC584320-AC2A-4A47-AE49-5322E296B5FA.jpg?v=1743905738"},{"product_id":"rob-cosman-s-medium-tenon-saw","title":"Rob Cosman’s Medium Tenon Saw","description":"\u003cp\u003eEvery hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. I design and manufacture two Tenon Saws to meet this requirement: my Large and Medium Tenon Saws. \u003c\/p\u003e\n\u003cp\u003eMy Medium Tenon Saw is built for the hobby woodworker and is specifically designed to make learning how to cut tenons easy.  My Large Tenon Saw is targeted towards the professional and advanced hobbyist woodworker.  Its size and weight provides you the capability to cut even the largest tenons, however; it requires that you have already mastered the skills to control the saw. \u003c\/p\u003e\n\u003cp\u003eBoth of my tenon saws are heavier than most providing you with better saw balance and reduced vibration. The weight, combined with the pistol grip style handle, trains you to make straight, perpendicular cuts. The relaxed cutting angle of the small front teeth starts the cut with ease and the diamond-saw formed teeth slice straight through the wood giving you a ready-to-joint surface.\u003c\/p\u003e\n\u003cp\u003eAfter watching thousands of my students struggle to learn how to use large tenon saws, I decided to design a tenon saw for the beginner and weekend woodworker.  My Medium Tenon Saw is the result.  It's slightly smaller than my Large Tenon Saw making its easier to control and use, but it's still big enough to meet 90% of all your tenon cutting requirements.\u003c\/p\u003e\n\u003cp\u003e22 TPI teeth with a relaxed cutting angle on the first two inches of the blade makes for super easy saw starts, after that the 12 tpi teeth cut quickly through your stock.  2\" depth of blade makes balancing and controlling the saw easier than my Large Tenon Saw. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e \u003cstrong\u003eSize:\u003c\/strong\u003e Overall length (Toe to handle tip): 15-7\/8 inches. Blade length (Toe to heal): 11 inches.  Depth of blade under the back: 2 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 20-22 ounces. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e Made from .025\" thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry:\u003c\/strong\u003e  First 2\" are filed rip at 22 TPI with a negative 30 degree rake. The remaining teeth are filed rip at 12 teeth per inch (TPI) and a 0 degree rake.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet:\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with diamond impregnated saws.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .029 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready to glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back:\u003c\/strong\u003e 1\/4″ thick x 15\/16″ wide brass back is secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful but it imparts extra weight to the saw, as compared to our competitors saws, that provides you a better balanced saw, allows the saw to do the cutting work, and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e Each of our \"pistol grip\" handles have memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back. Our handles are made from Richlite \u003cspan\u003ean incredibly durable, sustainable, and versatile material made from High-grade FSC-certified paper infused with a thermosetting resin\u003c\/span\u003e.   \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141763997776,"sku":null,"price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/A9AFD191-0BD4-467B-B305-947CA93DF044.jpg?v=1743906814"},{"product_id":"rob-cosman-s-large-tenon-saw","title":"Rob Cosman’s Large Tenon Saw","description":"\u003cp\u003eEvery hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. I design and manufacture two Tenon Saws to meet this requirement: my Large and Medium Tenon Saws. \u003c\/p\u003e\n\u003cp\u003eMy Large Tenon Saw is built for the professional or advanced hobbyist woodworker.  Its size and weight provides you the capability to cut even the largest tenons, however; it requires that you have already mastered the skills to control the saw. My Medium Tenon Saw is built for the hobby woodworker and is specifically designed to make learning how to cut tenons easy.\u003c\/p\u003e\n\u003cp\u003eBoth of my tenon saws are heavier than most providing you with better saw balance and reduced vibration. The weight, combined with the pistol grip style handle, trains you to make straight, perpendicular cuts. The relaxed cutting angle of the small front teeth starts the cut with ease and the diamond-saw formed teeth slice straight through the wood giving you a ready-to-joint surface.\u003c\/p\u003e\n\u003cp\u003eThis saw is designed for the professional or advanced hobbyist woodworker.  Its size and weight provides you the capability to cut even the largest tenons, however; it requires that you have already mastered the skills to control the saw. The 20 TPI teeth with a relaxed cutting angle on the first two inches of the blade makes for easy saw starts, 12 TPI teeth on the rest of the saw quickly and efficiently makes precise cuts in the densest hardwoods. 2-3\/4\" depth of blade allows you to handle very large tenon cuts. and the.025\" thick blade; provides the stiffness needed in a large saw.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eProduct Details:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e. Overall length (Toe to handle tip): 17 inches.  Blade length (Toe to heal): 12 inches.  Depth of blade under the back: 2-3\/4 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 22-24 ounces. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e  Made from .025 thick, spring steel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Geometry:\u003c\/strong\u003e First 2\" are filed rip at 22 TPI with a negative 25 degree rake. The remaining teeth are filed rip at 12 teeth per inch (TPI) and a negative 17 degree rake.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet:\u003c\/strong\u003e Unlike most saw manufacturers who stamp out their saw teeth, leaving \"dimples\" in the blade, we individually cut out each of our saw teeth with diamond impregnated saws.  This allows us to maintain a very slight set of only .002 inch (per side), since we don't introduce that \"dimple\" onto the blade.  This slight set produces a narrow .029 inch kerf that eliminates slop allowing the saw blade to accurately track in the saw kerf resulting in dead straight saw cuts with smooth ready to glue surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Back: \u003c\/strong\u003e1\/4″ thick x 1″ wide brass back is secured to the blade with peened and flushed copper pins.  Not only does the brass look wonderful but it imparts extra weight to the saw, as compared to our competitors saws, that provides you a better balanced saw, allows the saw to do the cutting work, and helps you \"feel\" perpendicular.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e\u003cspan\u003e Each of our \"pistol grip\" handles have memory enhancing carved finger recesses for a perfect and comfortable fit. A pair of brass split nuts secures the handle to the blade and the brass back.  \u003c\/span\u003e\u003cspan\u003eOur handles are made from Richlite \u003c\/span\u003e\u003cspan\u003ean incredibly durable, sustainable, and versatile material made from High-grade FSC-certified paper infused with a thermosetting resin\u003c\/span\u003e\u003cspan\u003e.  \u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Size \u0026amp; Determining your Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur handles come in two sizes: Regular and Large.  Please refer to the picture above showing how to measure your hand and determine what size handle is correct for you size hand.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41141764390992,"sku":null,"price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/7B1BA052-3C82-4939-A5EE-7E6E269BFFC0.jpg?v=1743907116"},{"product_id":"rob-cosman-s-moxon-vise","title":"Rob Cosman’s Moxon Vise","description":"\u003cp\u003eThe Moxon Vise, named after Joseph Moxon (who described the vise in his book titled Mechanick Exercises), is a great vise. A Moxon vise is especially useful for cutting dovetails and sawing because it holds the material rock solid and in the middle of the vise where it is not obstructed by any hardware. \u003c\/p\u003e\n\u003cp\u003eRob designed his own version of the Moxon Vise specifically designed for cutting dovetails.  It has a built in support that allows you to set your lumber at the perfect sawing height and then a flip up support to use when transferring tails to pins.\u003c\/p\u003e\n\u003cp\u003eIt uses all the components that come in our Cosmanized Moxon Vise Kit but it is a completely built vise.  If you prefer an already built Moxon vise that is ready to use instead of building your own then this is the vise for you!\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cb\u003eProduct Details:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed with poplar jaws and a baltic birch plywood base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Capacity:\u003c\/strong\u003e Approximately 17-1\/4 inches (438mm) holding capacity between the two threaded rods. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening Capacity:\u003c\/strong\u003e 2 - 3 inches (51mm - 76mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Jaw Dimensions:\u003c\/strong\u003e Approximately, 22 inches (559mm) long x 4 inches (102mm) wide x 2 inches thick (51mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Jaw Dimensions:\u003c\/strong\u003e 22 inches (559mm) long x 3-3\/4 inches (95mm) wide x 2 inches thick (51mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 25-1\/4 inches (641mm) x 5-1\/2 inches (140mm) x 3\/4 inch thick nominal (18mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Wheels:\u003c\/strong\u003e 2 x 5 inch (127mm) handwheels with revolving knobs attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3\/4 inch (18mm) x 8 inch (203) long acme threaded screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Acme threaded nuts with washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3 inch (76mm) long jaw opening springs that push open the jaw as you wind out the wheel. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3\/8 inch (9.5mm) long bronze self-lubricating bushings that allow the jaws to smoothly operate back and forth on the threaded rods..\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFront jaw is lined with cork \/ rubber to hold your material in the jaws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFlip up support for use when transferring tails to the pinboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41142350282832,"sku":null,"price":375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/16670D73-C1BA-4290-A696-7B4E0A0FD290.jpg?v=1744027185"},{"product_id":"ocww-gift-card","title":"OCWW Gift Card","description":"\u003cp\u003eNot sure what the woodworker in your life would prefer…a class or maybe a Rob Cosman Saw? The gift card is the answer!!\u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"$10.00","offer_id":41165393363024,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"$25.00","offer_id":41165393395792,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"$50.00","offer_id":41165393428560,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"$100.00","offer_id":41165393461328,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"$150.00","offer_id":41165393559632,"sku":null,"price":150.0,"currency_code":"USD","in_stock":true},{"title":"$200.00","offer_id":41165393592400,"sku":null,"price":200.0,"currency_code":"USD","in_stock":true},{"title":"$250.00","offer_id":41165393625168,"sku":null,"price":250.0,"currency_code":"USD","in_stock":true},{"title":"$300.00","offer_id":41165393657936,"sku":null,"price":300.0,"currency_code":"USD","in_stock":true},{"title":"$350.00","offer_id":41165393690704,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true},{"title":"$400.00","offer_id":41165393723472,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true},{"title":"$450.00","offer_id":41165393756240,"sku":null,"price":450.0,"currency_code":"USD","in_stock":true},{"title":"$500.00","offer_id":41165393789008,"sku":null,"price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/CE258660-68F5-4EC7-9905-7879D9BEA61C.jpg?v=1746386753"},{"product_id":"rob-cosman-shawn-shim-dovetail-offset-tool","title":"Rob Cosman Shawn Shim Dovetail Offset Tool","description":"\u003cp\u003eOne of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins.  Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.\u003c\/p\u003e\n\u003cp\u003eOffsetting by the exact thickness can be challenging, but the Shawn Shim helps improve your offset accuracy.  The brainchild of one of our Purple Heart Project alumni, we named the shim in honor of him.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrecisely milled to work with our regular dovetail saw, which requires a kerf thickness of .024 inches. The regular Shawn Shim has four different offsets to allow you to tighten or loosen the fit of the dovetails as needed. \u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC milled from solid brass. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4 inch x 3\/4 inch wide.  1-1\/2 inches tall.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFour offset sides: .023, .024, .025, .026 of an inch thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOffset amount engraved on each end of the shim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 100 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMade in Canada.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41171160662096,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0005_10_1080x810_xTXTc_1074x805_jpg.webp?v=1746925785"},{"product_id":"rob-cosman-shawn-shim-3-4-dovetail-offset-tool","title":"Rob Cosman Shawn Shim 3\/4 Dovetail Offset Tool","description":"\u003cp\u003eOne of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins.  Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.\u003c\/p\u003e\n\u003cp\u003eOffsetting by the exact thickness can be challenging, but the 3\/4 Shawn Shim helps improve your offset accuracy.  The brainchild of one of our Purple Heart Project alumni, we named the shim in honor of him.\u003c\/p\u003e\n\u003cp\u003ePrecisely milled to work with our 3\/4 dovetail saw, which requires a kerf thickness of .019 inches. The 3\/4 Shawn Shim has four different offsets to allow you to tighten or loosen the fit of the dovetails as needed. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC milled from solid brass. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8 inch x 5\/8 inch wide.  1-1\/4 inches tall.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFour offset sides: .018, .019, .020, .021 of an inch thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOffset amount engraved on each end of the shim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 100 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMade in Canada.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41171161382992,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0001_15_1080x810_wtxt_1073x805_jpg.webp?v=1746926023"},{"product_id":"rob-cosmans-apron-2-0","title":"Rob Cosman's Apron 2.0","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eEvery woodworker needs a good Apron.  We took our original apron and did a major design overhaul to toughen it up and we get - Apron 2.0!.  It’s made of 8oz cotton canvas which we find is the perfect weight for toughness while at the same time allowing you to move around and not overheat.  We improved the webbing to 1-1\/2 inches wide military specification webbing and buckles.   Each strap is fully adjustable to perfectly fit the apron to your body.  One large and two medium sized, rounded bottom pockets make it easy to reach in and grab the smallest item.  The large pocket features a half-round flap for those items you’d rather not have covered in saw-dust. And lastly, a combination pencil \/ ruler and cell phone pocket at chest height.  Everything is double stitched with military grade edging so things don’t pull apart.  Made in the U.S.A.  You will love it.\u003c\/span\u003e\u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41171163054160,"sku":"","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0008_16_1080x810_f0497918-d7be-4f65-b002-ec16f50d3fcf_1073x805_jpg.webp?v=1746926361"},{"product_id":"rob-cosman-logo-hat","title":"Rob Cosman Logo Hat","description":"\u003cp\u003eWe are proud to partner with the Richardson Hat company to offer our RC Logo on their 252 line of caps.  The RC logo represents the transition from small to big teeth on our backsaws.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan\u003eThe Richardson 252 cap is a\u003c\/span\u003e\u003cspan\u003e classic Dad Hat made from premium cotton and a high quality brass clasp for the adjustable hideaway backstrap give this cap timeless style. This is a low profile adjustable hat that contours to your head shape when wearing.  It has that worn-in look with a soft, comfortable feel that you can take everywhere.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEstablished in 1970 Richardson \u003cspan\u003eSports has been providing products for athletes to play sports and compete. They introduced their first Pro Model baseball cap back in 1987 and since then they have worked to provide the highest quality hats available. Known for their attention to detail, reliability, and an unmatched passion for quality. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRelaxed, worn-in vintage look, \"Dad hat\", similar to old baseball caps of the mid 20th century.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUnstructured (soft not stiff) low profile hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eYou can roll this cap up and fit it in your pocket, or pack it in a suitcase without concern that it will lose its shape. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSince it is an unstructured hat the top part of the hat will be lower and contours your head shape.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOne Size Fits Most.  If you have a really small head size of 7 and below or a head size bigger then 7-3\/4 this may not be the best fit. All other head sizes should fit well.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41171164594256,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/57DEA580-B61B-4388-B86C-849749AF78E7.jpg?v=1747017357"},{"product_id":"rc-tools-t-shirt","title":"RC Tools T Shirt","description":"\u003cp\u003e\u003cspan\u003eThe RC Tools Tee pays homage to the legendary craftsmanship of Rob Cosman’s tool line. T shirt is a poly\/cotton blend dri-fit and great for the summer! Features a super soft vintage style print. \u003c\/span\u003e\u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"S","offer_id":41173332688976,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":41173332721744,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":41173332754512,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":41173332787280,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"2XL","offer_id":41173332820048,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"3XL","offer_id":41173332852816,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/1BD9D0FC-8680-40D2-BD1F-D48C39E975E7.jpg?v=1747169316"},{"product_id":"rob-cosman-plane-adjustar-2-0","title":"Rob Cosman Plane AdjuSTAR 2.0","description":"\u003cp\u003eDo you find that using your plane's adjusting knob is a bit difficult? Well we did and decided to fix that by creating our Plane AdjuSTAR 2.0 adjusting knob to replace the original adjusting knob on most WoodRiver \u0026amp; Luban bench planes.\u003c\/p\u003e\n\u003cp\u003eOur Plane AdjuSTAR 2.0 is larger and much easier to use than the original adjusting knob allowing you to make adjustments to your blade depth setting easily.  Our design makes it easier for you to reach and turn the adjuster with your fingers and easier for you to reach the frog adjustment screw with a screwdriver. We know you will love our Plane AdjuSTAR 2.0.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade of\u003c\/strong\u003e\u003cspan\u003e forged\u003c\/span\u003e brass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to fit\u003c\/strong\u003e WoodRiver and Luban brand bench planes numbers\u003cspan\u003e 5, 5-1\/2, 6, 7, and 8\u003c\/span\u003e.  Requires removal of handle to install (see installation video).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWIll Not Fit\u003c\/strong\u003e the WoodRiver or Luban bench planes number 1, 3, 4, 4-1\/2 and 62. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1-7\/8 inch outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"WoodRiver \u0026 Luban","offer_id":41185069596752,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true},{"title":"Lie Nielsen","offer_id":41185069629520,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true},{"title":"Vintage Stanley \u0026 Record","offer_id":41185069662288,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/A1E5EAE7-955A-4BEC-B385-FC366D6B5E55.jpg?v=1747881000"},{"product_id":"rob-cosmans-fret-saw-with-12-blades","title":"Rob Cosman's Fret Saw with 12 Blades","description":"\u003cp\u003eRob prefers sawing most of his dovetail waste out with a fret saw instead of chopping it out with a chisel.  Sawing takes less effort and is easier to control.  Rob's fret saw features;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePinned handle to prevent separation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle taped like a hockey stick for better grip and control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFrame is stiff and top mounted wing nut allows tightening blade to resist bowing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight and with just a 3\" depth of throat it is balanced\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuick twist of the blade at clamping points eliminates throat capacity restrictions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAccepts 5 inch blades.  I highly recommend using our five inch, 12.5 tpi skip tooth blades with this saw.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSkip tooth blades cut faster, especially in hard woods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes a package of 12 blades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Overall length (maximum extension: 12 1\/2 inches; (minimum extension) 8 inches.  Maximum frame opening: 6 Inches.  Depth of throat: 3 inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 4 1\/2 inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 160 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e: Made from forged steel construction for exceptional performance and durability features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e  Wooden 4 inch long, wrapped in hockey grip tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e  Length: 5 inches.  Width = 0.038 inches, Thickness = .016 inches,  Teeth Per Inch (TPI) = 12.5 .\u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41195205820496,"sku":"","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/3B9378BF-689C-42E0-B5BC-966CADDCEE3E.jpg?v=1748988867"},{"product_id":"rob-cosman-s-dovetail-marking-knife-019-kerf","title":"Rob Cosman’s Dovetail Marking Knife .019 Kerf","description":"\u003cp\u003eIn 2013, Rob perfected a process taught by Ernest Joyce for transferring your tail board cuts onto the pin board, resulting in a perfectly placed starter kerf. Without removing the waste, Ernest would place his dovetail saw in the tail board cuts and mark onto the top of the pin board. It was cumbersome and uncomfortable to hold onto the saw by its teeth, and also increased the risk of misaligning the two boards. Rob decided to develop a saw-tooth blade that would fit into his trusty Dovetail Marking Knife with a kerf that would match his saw perfectly. This results in a more comfortable transfer procedure with greater control and a lower likelihood to misalign the boards in the process.\u003c\/p\u003e\n\u003cp\u003eBe sure to match the Dovetail Marking Knife that best suits the kerf of your dovetail saw: available in .019\", .024\", and .026\". Handles are engraved with the size of the kerf so there's no confusion if you own multiple. Don't forget to pick up a \u003ca rel=\"noopener\" title=\"3\/4 Shawn shim dovetail offsetting tool\" href=\"https:\/\/robcosman.com\/products\/3-4-shawn-shim-dovetail-offset-tool\" target=\"_blank\"\u003e\u003cspan\u003eShawn Shim Dovetail Offset Tool\u003c\/span\u003e\u003c\/a\u003e to ensure proper alignment before transferring tails to pins.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe knife body is made of cast metal and is surprisingly hefty.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo piece body with space to store a second blade.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe rectangular handle will register in your hand to help you “feel” the blade's position.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eComes with our .019\" (19 Thousandths of an inch) Saw-Tooth Blade.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacement blades available\u003cb\u003e.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRegular Saw-Tooth Blade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned specifically for use with my dovetail transfer technique.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMade of the same material as our saw plates, with a .019 inch thick kerf.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e.019 Saw Tooth Blade has 22 TPI so it fits into the kerf easily.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllows you to \"saw\" a starting kerf in the pin-board.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41195214733392,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/7BF99635-8F03-4119-805A-74F0E2E4D6E2.jpg?v=1748989095"},{"product_id":"rob-cosmans-kerf-x10-regular-size","title":"Rob Cosman's Kerf X10 Regular Size","description":"\u003cp\u003eBack in the summer of 1987, master craftsman, Tage Frid showed Rob his ingenious method of finishing the saw cuts on the pinboard of a half-blind dovetail joint. Rob couldn't believe how well and fast his method worked - it was like magic! Neil, a student from South Africa, suggested I make Tage's idea into a tool.  That inspired Rob's Kerf X-10 (extend the saw cut - get it?).  If you cut half-blind dovetails you will love this tool!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKerf X-10: Regular size works with our dovetail saw.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eKerf X-10: Regular size completes the saw cut in half-blind dovetails.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWaste removal is faster than paring and more accurate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWorks in soft and hardwoods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe Kerf X-10: Regular size works in saws kerfs in the .024 inch to .026 inch width range, such as our \u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/robcosman.com\/collections\/saws\/products\/rob-cosman-professional-dovetail-saw\" title=\"Rob Cosman's Dovetail Saw: Regular Size\"\u003eregular dovetail saw\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle is made of Cherry.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBlade is affixed to the ¼ inch x ¾ inch brass back with peened copper pins.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBrass back has a  1-1\/2 inch x ¼ inch x ¼ inch tenon epoxied into the handle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWorking edge of the blade is squared to the sides and ready for use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverall length is 7 inch, blade length 2 ¾ inch, depth ¾ inch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41195222270032,"sku":"","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0017_14_1080x810_c083d803-8503-4d66-b314-aeccbfdd87db_1074x805_jpg.webp?v=1748989491"},{"product_id":"rob-cosmans-hand-plane-shooting-grip","title":"Rob Cosman's Hand Plane Shooting Grip","description":"\u003cp\u003eWhy spend a lot of money purchasing a speciality shooting board plane when you can easily turn your jack or jointer plane into a high performing shooting plane just like Rob uses?\u003c\/p\u003e\n\u003cp\u003eOur Hand Plane Shooting Grip, known as \"The Grip,\" easily mounts to the side of most bevel down Jack (#5, #5-1\/2, or #6) or Jointer (#7 or #8) planes.  The shape of \"The Grip\" has been painstakingly shaped to conform to the crotch of your hand giving you next level control on your bench plane when using it on the shooting board.\u003c\/p\u003e\n\u003cp\u003eWe have designed \"The Grip\" for easy mounting and our instructional videos takes you step-by step through the mounting process using either a drill press or a power hand drill.  Use your own 1\/8 inch, 1\/4 inch , and chamfering drill bits or purchase our inexpensive drill bit kit.\u003c\/p\u003e\n\u003cp\u003eEasily slips on and off your plane in seconds.  Prevents blisters and rubbing your hand raw when shooting with a bench plane.  You will love it - we actually guarantee it!        \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from cast aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFits most bevel down Jack (#5, #5-1\/2, #6) and jointer (#7, #8) bench planes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequires a 1\/4 inch mounting hole to be drilled 3\/16 inch deep in the side of your plane.  Easy instructional videos in the picture gallery.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eComes in left or right handed versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eDrill bit mounting kit sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Right Handed","offer_id":41412070309968,"sku":null,"price":45.0,"currency_code":"USD","in_stock":false},{"title":"Left Handed","offer_id":41412070342736,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0004_34_1080x810_1073x805_29cefcf0-fa43-43fb-aad9-0985c3015bfe.webp?v=1762558997"},{"product_id":"rob-cosmans-winding-sticks","title":"Rob Cosman's Winding Sticks","description":"\u003cp\u003eWinding sticks are a time honored jig that helps you evaluate if the surface of a board has any wind or twist.  To give you an accurate reading the winding sticks must be precisely made.  Here are why my winding sticks give you the professional results you demand:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from extremely stable, torrefied wood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTorrefied wood has undergone a high-heat treatment changing the cellular make-up of the wood so that the wood does not react to moisture.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrecisely milled flat, square, and parallel to give accurate measurements.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe sticks are tapered narrow top and a wide bottom to increase stability when upright.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2\" Tall x 20\" Long x 5\/8\" Wide at the base. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInlaid with a white wood, American Holly, in the corners and centers for easy and accurate readings. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePins mate the sticks together for storage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41883946090576,"sku":null,"price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Winding1.webp?v=1764859191"},{"product_id":"optivisor","title":"OptiVISOR","description":"\u003cp\u003e\u003cspan\u003eOptiVISOR is a precision binocular headband magnifier which permits unrestricted user efficiency while leaving both hands free to work. Super lightweight, easy to adjust, and comfortable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is perfect for any woodworker who needs extra magnification when viewing their work.  Rob uses his OptiVISORs constantly and has tried several similar brands but nothing beats his OptiVISOR magnifiers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur model of the OptiVISOR comes with the 1.75 times magnifying lenses (DA-3), which Rob prefers. Other magnifications are available, from 1.5x to 3.5x, however this is the one that Rob uses the most.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical glass prismatic lenses:\u003c\/strong\u003e Ground and polished to precision optical standards—bevel edged and mounted in an interchangeable plastic frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt tilts:\u003c\/strong\u003e Adjustable pivots allow the visor to be tilted out of the way when not needed and at your fingertips when you need magnification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable padded headband:\u003c\/strong\u003e Conforms to fit all head sizes—fabricated from a special blend lightweight material. Comfortable when worn for long periods of time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh impact visor:\u003c\/strong\u003e Provides a tough, durable, always-new appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine leather comfort band:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePadded orthopedic felt adds to comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional magnification lenses available. \u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSorry we do not carry any of the additional interchangeable lenses, but they can be purchased from Donegan Optical. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41966087536720,"sku":null,"price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/A0608302-5A33-4A43-9C2A-F7A5EAED0D65.jpg?v=1769225478"},{"product_id":"rob-cosman-moxon-vise-hardware-kit","title":"Rob Cosman Moxon Vise Hardware Kit","description":"\u003cp\u003eA Moxon Vise, named after Joseph Moxon (who described the vise in his book titled Mechanick Exercises), is a great vise, and best of all it is easy to build yourself. A Moxon vise is especially useful for cutting dovetails and sawing because it holds the material rock solid, and the middle of the vise is not obstructed by vise hardware. All you need is some 8\/4 hardwood for the jaws and our Rob Cosman Moxon Vise Hardware Kit to make whatever vise size Moxon vise best suit your needs.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cb\u003eProduct Details:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMoxon hardware only (Kit DOES NOT include wooded jaws).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 5 inch hand wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3\/4 inch x 8 inch long acme threaded screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Acme threaded nuts with washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3 inch long jaw opening springs (compressed spring length is 3\/4 inch). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x revolving knobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 3\/8 inch long bronze self-lubricating bushings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 24 inch long cork \/ rubber self-adhesive strip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral instructions for making the traditional style Moxon Vise. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":41992520335440,"sku":null,"price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0008_33_1073x805_91ca7087-49e0-4a0d-b86e-1049e08cba0b.webp?v=1770349200"},{"product_id":"rc-premium-diamond-sharpening-stone","title":"RC Premium Diamond Sharpening Stone","description":"\u003cp\u003eI recommend and use 300 \/ 1000 grit, double-sided, diamond stones as an essential part of my tool sharpening method.  Our diamond stones use only high quality mono-crystalline man-made industrial diamonds permanently adhered by electropla\u003cimg\u003eting to a thick, precision milled, steel substrate.  Use the 300 side for flattening your water \/ ceramic sharpening stones and the 1000 side to establish your secondary bevel or your initial flattening grit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe quality control test EVERY diamond stone we receive to determine if it's flatness is within our standard of being out of flat, either convex or concave, by no more than .004 (4 thousandths) of an inch.  Stones outside our standards are rejected. Diamond stones within our standards are further graded as \"Standard\" or \"Premium\" quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe difference between our standard and the premium version diamond stones is the level of flatness.  Diamond stones that test between .0016 and .004 (1.6 to 4 thousandths of an inch) out of perfectly flat, are graded as \"standard.\"  Diamond stones that test between .0000 to .0015 (perfectly flat to 1.5 thousandths of an inch) out of perfectly flat are graded as \"premium.\"  \u003c\/p\u003e\n\u003cp\u003ePremium diamond stones are recommended for flattening the back of chisels and other applications where near perfect flatness is a must.  Standard diamond stones are recommend for routine sharpening of plane blades and chisel cutting edges and general sharpening uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct details \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePrecision milled, double-sided diamond stone 3\" wide x 8\" long.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectroplated with \u003cspan\u003eMonocrystalline industrial diamonds.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFine 1000 grit (5 micron) on one side and coarse 300 grit (50 micron) on the other.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClearance channels on the coarse side produces a faster, cleaner cut.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the coarse side for flattening your water \/ ceramic sharpening stones and on your chisel and planes when you need some aggressive cutting action.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the fine side for sharpening your secondary bevel on plane blades and chisels and other edge tools. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eComes complete with a non-slip mat.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne-Time Break-in Procedure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe 300 grit side of our diamond stones requires a one time break-in procedure.  There is an excess layer of diamonds which needs to be removed before the surface is at its optimum. Break-in the stone by rubbing a piece of steel (a screw driver shaft, plane blade, etc.) over the entire surface of the 300 grit side for 1 minute.  Rinse and wipe off the diamond stone; it is now ready to use. Failure to break-in the 300-grit side can lead to cross-contamination of water stones. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42119483195472,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/PremiumDiamondStone.webp?v=1773090712"},{"product_id":"shapton-16-000-ceramic-hr-glass-stone","title":"Shapton 16,000 Ceramic HR Glass Stone","description":"\u003cp\u003eShapton Ceramic HR Glass Stones are the finest man-made ceramic water stones….period! This is based largely on two properties - the speed at which the Shapton stones cut and the edge they create. Shapton stones are designed to be harder, faster cutting, and denser than any other ceramic water stone on the market. Because they remove material quickly, the time required to hold a tool angle on the stone is reduced, making free hand sharpening much easier. Equally important to cutting speed is the consistency of the finished edge. The sharpest cutting edge is created by the finite intersection of two highly polished, flat surfaces and I think Shapton stones create the best polished surfaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eEach stone is comprised of a 5mm thick glass backing plate fused to a 5mm thick stone and measures 2-3\/4” wide x 8-1\/4” long.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI recommend purchasing, and using, the Shapton heavy stone holder. As it provides a secure platform making it easier to flatten and use your stone.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor polishing tool edges I use my Trend diamond stone (fine side) to create a secondary bevel then follow that up with my Shapton 16,000 grit stone to create a polished tertiary bevel, free of scratches, with a mirror finish and a razor sharp edge.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor flattening the backs of my chisels I follow up my Trend diamond stone with a Shapton 6000 grit stone then a Shapton 16,000 grit stone.  Together these leave a flat, mirrored surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor folks who are willing to spend some more money and time to gain an extra 2-5% of edge sharpness follow-up your Shapton 16,000 grit stone with the Shapton 30,000 grit stone.   \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe Shapton GlassStone HR Series of Ceramic Waterstones is Shapton's most advanced series of stones for sharpening hard steels and modern steel alloys. They are one of the highest quality stones available at any price. Manufactured to the strictest tolerances, the Shapton GlassStone is a high quality ceramic waterstone that uses uniform ceramic abrasives to provide a consistent and fast cut. The stones are backed with glass (hence the name GlassStone) to provide an exceptionally flat base. The Shapton GlassStones measure 8 1\/4\" long and 2 3\/4\" wide x 3\/8\" thick (210mm x 70mm x 10.5mm). Made in Japan.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast Cutting and Longer Wearing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWaterstones are known for fast cutting which speeds up sharpening. Shapton GlassStones are very fast cutting, yet they wear much less than traditional waterstones. By wearing slower, they will require less flattening and you will remove less abrasive material when flattening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGlass Backing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach stone is backed with 5 millimeters of glass which provides a firm, flat base to adhere the ceramic waterstone abrasives. In addition, the glass backing provides you with a greater utilization of the stone because you can wear it down to the very end. In any other waterstone, as they wear thin, the stone will break and cannot be used.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive Particles.\u003c\/strong\u003e The abrasive particles in the Shapton stones are very consistently graded for optimal performance. In some grits, the particles are within .01 micron of one another. In other words, each particle is the same size. This uniform size allows the stone to sharpen faster and create a better finish. If a stone is inconsistently graded some particles are larger (thus providing a coarser edge) while some are smaller (slowing down the sharpening process). In usage we've found Shapton Stones to be very consistent and true to the specified grits.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize.  \u003c\/strong\u003eShapton GlassStones measures 210mm x 70mm x 10.5mm. This is approximately 8-1\/4\" x 2-3\/4\" x 3\/8\". Each GlassStone is 10.5mm in total thickness with 5mm ceramic sharpening matrix and 5mm glass backing plate. This size is a good size for sharpening most tools and knives.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a GlassStone?\u003c\/strong\u003e The stone itself is not made of glass. The ceramic sharpening matrix is actually white. The glass is only on the bottom of the stone to serve as a base. The grit and micron equivalents are marked on the underside of the stone and visible through the glass side for easy identification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo Soaking Required.\u003c\/strong\u003e Unlike traditional waterstones, Shapton waterstones do not require soaking. It is literally a “splash and go” stone. Since the binder doesn't absorb water, there is no need to soak the stones. We recommend a squirt bottle to keep the surface wet.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHR Series.\u003c\/strong\u003e The HR Series of GlassStones is a versatile stone for most sharpening applications. The HR Series is ideal for many harder steels, stainless steels as well as harder steel alloys.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMade in Japan.\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42119485259856,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Shapton16_000.webp?v=1773090914"},{"product_id":"shapton-heavy-stone-holder","title":"Shapton Heavy Stone Holder","description":"\u003cp\u003eThe Shapton heavy stone holder provides a stable base to hold Shapton's GlassStone Ceramic Waterstones.  It is made of rubber and glass so it can be rinsed off easily and there's nothing to rust.  This holder weighs in at a very hefty 4 pounds to ensure that your stones won’t budge when you are either flattening or sharpening. I always use this holder with my Shapton stones and I recommend that you do too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for use with all Shapton GlassStones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3.5\" wide x 10\" long.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWeighs 4 pounds.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNothing to rust or wear out.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGives you a stable base for your stones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42119486505040,"sku":null,"price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_3521_1080x810_text_1074x805_a6f3a63c-23c3-4743-bf60-61cbe55c9cd3.webp?v=1773091175"},{"product_id":"honerite-gold","title":"HoneRite Gold","description":"\u003cp\u003eHonerite Gold is a universal grinding, honing and lapping additive that makes water non-corrosive. I always add Honrite Gold to my water when I fill up my sharpening station squirt bottle.  Honrite Gold makes the water non-corrosive and deposits protection onto the steel in the form of water soluble corrosion inhibitors.  This helps keep my Trend Diamond Stone rust free and operating like new.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHelps prevent corrosion on your metal tools and diamond stones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDiamond stones call for oil, ceramic\/Waterstones call for water; Honerite works on both.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps prevent rust from forming on your diamond bench stones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eContains Water Soluble Anti Corrosion Inhibitors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSafe for use on all types of water and ceramic sharpening stones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne bottle of HoneRite concentrate will produce 6 quarts of sharpening fluid when mixed with water.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42119488569424,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_5395_1080x810_1074x819_87d77f70-367d-4108-bf8c-d68482870c0f.webp?v=1773091302"},{"product_id":"rob-cosmans-sharpening-rule","title":"Rob Cosman's Sharpening Rule","description":"\u003cp\u003eOur sharpening ruler includes a small \"hook\" on one end so that it catches on the sharpening stone to help the ruler not slide around. \u003c\/p\u003e\n\u003cp\u003eThe most innovative technique in plane sharpening over the last 35 years is the \"ruler trick\" by David Charlesworth. Traditionally, a sharp cutting edge is achieved by honing the back of your plane blade until it is dead flat (this takes hours), then you hone the primary bevel to achieve a razor sharp edge. \u003c\/p\u003e\n\u003cp\u003eDavid Charlesworth introduced his ruler trick to save significant time while still achieving a razor sharp edge.  Instead of flattening the whole blade back, he placed a thin ruler on the stone raising up the blade about 1 degree, effectively flattening the blades' leading edge, not the whole back.  David's \"ruler trick\" works great.\u003c\/p\u003e\n\u003cp\u003eWe custom make our sharpening ruler specifically for the \"ruler-trick\" \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10-1\/2 inches (267mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth: \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e1\/2 inch (13mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e.020 inches (.05mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSits down by .070 inch (1.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo ruler etchings so the blade freely slides back and forth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging Hole:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSmall hole at one end to hang the ruler.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273252474960,"sku":null,"price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0063_3_1080x810_1080x811_4e2fccab-2086-4b3e-a74e-dbd0198f8d91.jpg?v=1776133678"},{"product_id":"cosmanized-frog-adjustment-driver-hex-drive","title":"Cosmanized Frog Adjustment Driver: Hex Drive","description":"\u003cp\u003eOur Cosmanized Frog Adjustment Driver: Hex Drive fits both the WoodRiver and Lie Nielsen versions of our Hex Socket Replacement Screws.\u003c\/p\u003e\n\u003cp\u003eThe 6-inch long shank coupled with its ball-end hex drive makes accessing our hex socket frog adjustment replacement screws super easy and quick.  With the combination of our hex socket replacement screws and our matching adjustment drivers, adjusting your hand plane is faster and better than ever.\u003c\/p\u003e\n\u003cp\u003eFinally, we wrap the handle with hockey tape to help ensure a good grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOverall length: 10-1\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle Length: 4-1\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShank Length: 6 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle Diameter:  1-1\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHex Size: 3\/16 inch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273253458000,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0021_1080x810_1073x805_0744a0b3-c2a4-42f9-b7a6-075d68ea3e78.webp?v=1776134046"},{"product_id":"cosmanized-plane-adjustment-driver-hex-drive","title":"Cosmanized Plane Adjustment Driver: Hex Drive","description":"\u003cp\u003eOur Cosmanized Plane Adjustment Driver: Hex Head fits both the WoodRiver and Lie Nielsen versions of our Hex Socket Replacement Screws.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 1-1\/2 inch long shank makes accessing our hex socket lever cap and chip-breaker screws super easy and quick.  With the combination of our hex socket replacement screws and our matching adjustment drivers, adjusting your hand plane is faster and better than ever.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFinally, we wrap the handle with hockey tape to help ensure a good grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOverall length: 5-3\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle Length: 4-1\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShank Length: 1-1\/2 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHandle Diameter:  1-1\/4 inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHex Drive: 3\/16 inch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273255882832,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0007_1080x810_1073x805_21fc0c3d-7992-4fda-9bd7-30a65702aeea.webp?v=1776134199"},{"product_id":"hex-socket-replacement-screws-woodriver-version","title":"Hex Socket Replacement Screws: WoodRiver Version","description":"\u003cp\u003eOur Hex Socket Replacement Screws: WoodRiver set, upgrades the five adjustment screws on your WoodRiver bevel down bench planes, giving you significantly better control versus the factory supplied slotted screws.\u003c\/p\u003e\n\u003cp\u003eOur hex socket screw set replaces the following five factory screws: lever cap screw, chip-breaker screw, 2 x frog pin retaining screws (bedrock style), and the frog adjustment screw.\u003c\/p\u003e\n\u003cp\u003eEach screw has a 3\/16 inch hex socket head so that all our plane adjustment screws can be adjusted using the same size hex driver.\u003c\/p\u003e\n\u003cp\u003eThe underside of the lever cap screw is countersunk so that it \"grips\" the lever cap when pressure is applied preventing the slippage that the factory supplied lever cap screw is prone to doing. \u003c\/p\u003e\n\u003cp\u003eSee our Hex Drive Adjustment Drivers for use with these screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSold as a set ONLY; no individual screw sales.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFits WoodRiver bench planes #3, #4, #4-1\/2, #5, #5-1\/2, #6, and #7 ONLY.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eScrew Thread Sizes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eChip-Breaker screw: M8x1.25 5g6g\u003c\/li\u003e\n\u003cli\u003eFrog Adjustment screw: M6x1.0 5g6g\u003c\/li\u003e\n\u003cli\u003eFrog Retaining Pin screw: M6x1.0 5g6g\u003c\/li\u003e\n\u003cli\u003eLever Cap screw: M8x1.25 5g6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273262731344,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/ScrewSetWoodRiver_1080x810_1073x805_e1daf5aa-70b2-4381-b9e8-35ab93eefa62.webp?v=1776134514"},{"product_id":"hex-socket-replacement-screws-lie-nielsen-version","title":"Hex Socket Replacement Screws: Lie Nielsen Version","description":"\u003cp\u003eOur Hex Socket Replacement Screws: Lie Nielsen set, upgrades the five adjustment screws on your Lie Nielsen bevel down bench planes, giving you significantly better control versus the factory supplied slotted screws.\u003c\/p\u003e\n\u003cp\u003eOur Hex Socket screw set replaces the following five factory screws: lever cap screw, chip-breaker screw, 2 x frog retaining pin screws (bedrock style), and the frog adjustment screw.\u003c\/p\u003e\n\u003cp\u003eEach screw has a 3\/16 inch hex socket head so that all our plane adjustment screws can be adjusted using the same size hex driver.\u003c\/p\u003e\n\u003cp\u003eThe underside of the lever cap screw is countersunk so that it \"grips\" the lever cap when pressure is applied preventing slippage, just like the factory supplied lever cap screw.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSee our Hex Drive Adjustment Drivers for use with these screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSold as a set ONLY; no individual screw sales.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFits Lie Nielsen bench planes #3, #4, #4-1\/2, #5, #5-1\/2, #6, #7, #8, #10-1\/4 ONLY\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eScrew Thread Sizes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eChip-Breaker screw: 5\/16-18 UNC\u003c\/li\u003e\n\u003cli\u003eFrog Adjustment screw: 1\/4-28 UNF\u003c\/li\u003e\n\u003cli\u003eFrog Retaining Pin screw: 1\/4-28 UNF\u003c\/li\u003e\n\u003cli\u003eLever Cap screw: 9\/32-24 UNS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273266565200,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/ScrewSetLieNielsen_1080x810_1073x805_2684c0d4-66b8-43f0-9d7a-4de06863143d.webp?v=1776134752"},{"product_id":"hex-socket-replacement-screws-vintage-stanley-bailey-version","title":"Hex Socket Replacement Screws: Vintage Stanley Bailey Version","description":"\u003cp\u003eOur Hex Socket Replacement Screws: Vintage Stanley Bailey Version, upgrades the five adjustment screws on your Vintage Stanley Bailey bevel down bench planes, giving you significantly better control versus the factory supplied slotted screws.\u003c\/p\u003e\n\u003cp\u003eOur hex socket screw set replaces the following five factory screws: lever cap screw, chip-breaker screw, 2 x frog retaining screws (bailey style), and the frog adjustment screw.\u003c\/p\u003e\n\u003cp\u003eEach screw has a 3\/16 inch hex socket head so that all our plane adjustment screws can be adjusted using the same size hex driver.\u003c\/p\u003e\n\u003cp\u003eThe underside of the lever cap screw is countersunk so that it \"grips\" the lever cap when pressure is applied preventing the slippage that the factory supplied lever cap screw is prone to doing. \u003c\/p\u003e\n\u003cp\u003eSee our Hex Drive Adjustment Drivers for use with these screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSold as a set ONLY; no individual screw sales.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFits Vintage Stanley Bailey bevel down bench planes #2, #3, #4, #4-1\/2, #5, #5-1\/4, #5-1\/2, #6, #7, and #8.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMay fit other vintage planes in the Stanley Bailey style, but we have not tested them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eScrew Thread Sizes (OD X TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eChip-Breaker screw: 5\/16 inch x 18\u003c\/li\u003e\n\u003cli\u003eFrog Adjustment screw: 1\/4 inch x 24\u003c\/li\u003e\n\u003cli\u003eFrog Retaining screws: #12 x 20\u003c\/li\u003e\n\u003cli\u003eLever Cap screw: 9\/32 inch x 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273270628432,"sku":null,"price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0007_42_1080x810_1073x805_4f21fda1-8653-45c2-a4b9-2b70da80f92c.webp?v=1776134969"},{"product_id":"hex-socket-replacement-screws-vintage-stanley-bedrock-version","title":"Hex Socket Replacement Screws: Vintage Stanley Bedrock Version","description":"\u003cdiv id=\"shopify-section-template--18537619849394__product_tabs_CPR6Ma\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"product__container\"\u003e\n\u003cdiv class=\"product-tabs\" data-design=\"tabs\"\u003e\n\u003cdiv class=\"contents\"\u003e\n\u003cdiv class=\"tab\"\u003e\n\u003cdiv class=\"product-single__description rte\" itemprop=\"description\"\u003e\n\u003cp\u003eOur Hex Socket Replacement Screws: Vintage Stanley Bedrock Version, upgrades the five adjustment screws on your Vintage Stanley Bedrock bevel down bench planes, giving you significantly better control versus the factory supplied slotted screws.\u003c\/p\u003e\n\u003cp\u003eOur hex socket screw set replaces the following five factory screws: lever cap screw, chip-breaker screw, 2 x frog retaining pin screws (bedrock style), and the frog adjustment screw.\u003c\/p\u003e\n\u003cp\u003eEach screw has a 3\/16 inch hex socket head so that all our plane adjustment screws can be adjusted using the same size hex driver.\u003c\/p\u003e\n\u003cp\u003eThe underside of the lever cap screw is countersunk so that it \"grips\" the lever cap when pressure is applied preventing the slippage that the factory supplied lever cap screw is prone to doing. \u003c\/p\u003e\n\u003cp\u003eSee our Hex Drive Adjustment Drivers for use with these screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSold as a set ONLY; no individual screw sales.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFits Vintage Stanley Bedrock bevel down bench planes #2, #3, #4, #4-1\/2, #5, #5-1\/4, #5-1\/2, #6, #7, and #8.  May fit other vintage planes in the Stanley Bedrock style, but we have not tested them.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eScrew Thread Sizes (OD X TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eChip-Breaker screw: 5\/16 inch x 18\u003c\/li\u003e\n\u003cli\u003eFrog Adjustment screw: 1\/4 inch x 24\u003c\/li\u003e\n\u003cli\u003eFrog Retaining Pin screws: 1\/4 inch x 24\u003c\/li\u003e\n\u003cli\u003eLever Cap screw: 9\/32 inch x 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"bundler-target-element\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273272332368,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0003_35_1080x810_1073x805_a6662321-0abb-446b-9c89-493f96a4696d.webp?v=1776135111"},{"product_id":"rob-cosmans-plane-adjustar-mini-lie-nielsen-version","title":"Rob Cosman's Plane AdjuSTAR Mini: Lie-Nielsen Version","description":"\u003cp\u003eDo you find that using your plane's adjusting knob is a bit difficult? Well we did and decided to fix that by creating our Plane AdjuSTAR Mini knob to replace the original adjusting knob on most of the smaller bench planes.\u003c\/p\u003e\n\u003cp\u003eOur Plane AdjuSTAR Mini is a smaller version of our regular AdjuSTAR but it fits in tight spaces that our regular AdjuSTAR will not fit.\u003c\/p\u003e\n\u003cp\u003eThe AdjuSTAR Mini is still larger and much easier to use than the original adjusting knob allowing you to make adjustments to your blade depth setting easily.  Our star design makes it easier for you to reach and turn the adjuster with your fingers and easier for you to reach the frog adjustment screw with a screwdriver. We know you will love our Plane AdjuSTAR Mini.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade of\u003c\/strong\u003e\u003cspan\u003e forged\u003c\/span\u003e brass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe smaller Lie Nielsen bench planes, numbers 2, 3, 4, 4-1\/2, 10-1\/4, and 51.  The mini will fit the larger Lie Nielsen bench planes but we recommend our regular AdjuSTAR for the larger bench planes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1-7\/16 inch outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273272430672,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Robs_Version_LN_Mini_1074x805_2f262072-d51f-47d2-8a53-bee3e4bbc4a7.webp?v=1776135352"},{"product_id":"rob-cosmans-plane-adjustar-mini-vintage-stanley-record-version","title":"Rob Cosman's Plane AdjuSTAR Mini: Vintage Stanley \u0026 Record Version","description":"\u003cp\u003eDo you find that using your vintage Stanley or Record bench plane's adjusting knob is a bit difficult? Well we did and decided to fix that by creating our Plane AdjuSTAR Mini adjusting knob to replace the original adjusting knob on MOST (read below) vintage Stanley and Record smalller bench planes.  \u003c\/p\u003e\n\u003cp\u003eOur Plane AdjuSTAR Mini is a smaller version of our regular AdjuSTAR but it fits in tight spaces that our regular sized ones will not.  The AdjuSTAR Mini'S star design makes it easy for you to reach in and turn the adjuster with your fingers.  Thes star design also makes reaching your frog adjustment screws with a screwdriver much easier. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIMPORTANT. \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWE DO NOT GUARANTEE THAT OUR ADUSTAR WILL FIT EVERY VINTAGE LEFT HAND THREADED STANLEY OR RECORD PLANE.\u003c\/span\u003e  (Please read the below paragraph \"Won't work on Some Stanley and Record Planes\"). To compensate our customers for the possibility that our AdjuSTAR may not fit your vintage plane, we price our vintage Stanley and Record AdjuSTA S substantially lower than our AdjuSTARS for modern planes. \u003cspan\u003e  ALL SALES OF VINTAGE STANLEY \u0026amp; RECORD ADJUSTARS ARE FINAL - NO RETURNS. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLeft Hand Threaded.\u003c\/strong\u003e All of our AdjuSTARS are threaded with LEFT HAND threads, which fit the vast majority of vintage planes; however, Stanley and Record did make right hand threaded planes, which our adjuSTARS WILL NOT fit on.  You can tell if your vintage plane has a left hand thread if you remove your adjuster knob and then reinstall it.  If it threads on when turning in a counterclockwise motion you have a left hand threaded plane. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAdjuSTAR Won't Work on Some Stanley and Record Planes.  \u003c\/strong\u003eStanley and Record made tens of thousands of planes at numerous factories in many countries. The standards of production varies between planes depending on when and where they were manufactured.  In particular, the threads on the adjusting knob rods are quite coarse and sloppy and have a lot of variability.  We have tested our AdjuSTAR on hundreds of Stanley and Record planes and they fit about 90% of left hand threaded Stanley and Record vintage planes.  However, we do find a few left hand threaded Stanley and Record plane threaded rods that our AdjuSTARS just won't fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT DETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade of\u003c\/strong\u003e\u003cspan\u003e forged\u003c\/span\u003e brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to fit\u003c\/strong\u003e\u003cspan\u003e smaller vintage Stanley and Record\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eLEFT HAND threaded\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebench planes numbers 2, 3, 4, 4-1\/2, 5-1\/4, and 10\u003c\/span\u003e\u003cspan\u003e. It may fit other smaller vintage left hand threaded planes but we have not tested them.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eDoes not fit\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e any\u003c\/span\u003e\u003cspan\u003e vintage Stanley or Record \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eRIGHT HAND threaded planes.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eDoes not fit\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e the new Stanley Sweetheart line of planes.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1-7\/16 inch outside diameter.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eThread Size. \u003c\/strong\u003e The thread size on vintage Stanley and Record planes is non-standard and commercially unavalible.  We had to have our thread dies for Vintage Stanley and Record Adjustars custom made.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eReturn Policy:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eALL SALES OF VINTAGE STANLEY \u0026amp; RECORD ADJUSTAR MINIS ARE FINAL - NO RETURNS. \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273273774160,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Robs_Version_Stanly_Mini_1074x805_b9a0f871-c0c7-41da-8828-0b37f53705aa.webp?v=1776135534"},{"product_id":"rob-cosmans-plane-adjustar-mini-woodriver-luban-version","title":"Rob Cosman's Plane AdjuSTAR Mini: WoodRiver \u0026 Luban Version","description":"\u003cp\u003eDo you find that using your plane's adjusting knob is a bit difficult? Well we did and decided to fix that by creating our Plane AdjuSTAR Mini knob to replace the original adjusting knob on most of the smaller bench planes.\u003c\/p\u003e\n\u003cp\u003eOur Plane AdjuSTAR Mini is a smaller version of our regular AdjuSTAR but it fits in tight spaces that our regular AdjuSTAR will not fit.\u003c\/p\u003e\n\u003cp\u003eThe AdjuSTAR Mini is still larger and much easier to use than the original adjusting knob allowing you to make adjustments to your blade depth setting easily.  Our star design makes it easy for you to reach and turn the adjuster with your fingers and easy for you to reach the frog adjustment screw with a screwdriver. We know you will love our Plane AdjuSTAR Mini.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade of\u003c\/strong\u003e\u003cspan\u003e forged\u003c\/span\u003e brass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe smaller WoodRiver and Luban bench planes, numbers 1, 2, 3,  4 and 4-1\/2.  The AdjuSTAR mini will also fit the larger WoodRiver and Luban bench planes, but we recommend our regular AdjuSTAR for the larger bench planes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1-7\/16 inch outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42273282195536,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Robs_Version_WR_mini1_1074x805_092ef9ff-5dbc-40a7-9285-7430f40d6d4d.webp?v=1776135777"},{"product_id":"rc-dovetail-marker","title":"RC Dovetail Marker","description":"\u003cp\u003eMarking your dovetail pins and tails can be a laborious task if you do not have a well designed marker. My Dovetail Marker is designed for marking both through and half-blind dovetails. My Dovetail Marker enables you to quickly, accurately, and repeatedly layout your tails.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from a solid piece of wood, it fits and feels great in your hand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllows you to lay out the angle cut and its associated straight cut without re-positioning the marker.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHas 1:6 and 1:7 angled vertical faces and a 90 degree horizontal face.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1:6 is the traditional angle for softwoods and 1:7 is the traditional angle for hardwoods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShipping box doubles as a handy storage container to keep it from getting beat up in your tool box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42372833116240,"sku":null,"price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/Dovetail_marker_2_1080x810_1074x805_cb1af75a-581b-479f-b6d9-89d7dca19dda.webp?v=1779217361"},{"product_id":"rob-cosmans-dovetail-square","title":"Rob Cosman's Dovetail Square","description":"\u003cp\u003eMarking your dovetail pins and tails can be a laborious task if you do not have a well designed marker. My Dovetail Marker is designed for marking both through and half-blind dovetails. My Dovetail Marker enables you to quickly, accurately, and repeatedly layout your tails.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from a solid piece of wood, it fits and feels great in your hand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllows you to lay out the angle cut and its associated straight cut without re-positioning the marker.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHas 1:6 and 1:7 angled vertical faces and a 90 degree horizontal face.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1:6 is the traditional angle for softwoods and 1:7 is the traditional angle for hardwoods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShipping box doubles as a handy storage container to keep it from getting beat up in your tool box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42372835672144,"sku":null,"price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_2152_1080x810_1074x805_63deb516-08f1-4c49-85f5-a3a506247c29.webp?v=1779217623"},{"product_id":"3m-automotive-refinish-masking-tape-3-4-inch-wide","title":"3M Automotive Refinish Masking Tape: 3\/4 inch wide","description":"\u003cp\u003eI discovered this 3M automotive refinish masking tape and its really wonderful stuff.  I call it super painter's tape because it's thicker and sticks better than ordinary blue or green painter's tape, yet it still peels off easily without leaving any residue or marring the surface.  Its very stretchy so you can pull and manipulate the tape around corners without tearing.\u003c\/p\u003e\n\u003cp\u003eI use it as a substitute for cutting a rabbet on the tailboard of my dovetails, as a clamp when applying edge banding (just stretch the tape around the edge banding), and as a clamp to hold together small miter cornered boxes.\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e100's of uses around the workshop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eExcellent conformability so you can stretch and manipulate the tape to fit curves and contours without tearing\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSticks to lots of surfaces: Proprietary rubber-based adhesive delivers instant adhesion to a variety of substrates including wood, plastic, glass, metal, rubber and painted surfaces\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eRemoves easily and cleanly: The tape removes cleanly and easily, in one piece and leaves no adhesive residue\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"O'Connor Woodworking","offers":[{"title":"Default Title","offer_id":42372838391888,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/files\/IMG_0003_1_2_1080x810_1073x805_b2764428-9377-4716-bc0a-ec45b43e5736.webp?v=1779217911"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4643\/8224\/collections\/B_W_Horizontal_-_Regular_590x200_4f99fa4d-19e7-48e9-b3f2-e335a8b83c09_590x200_webp.png?v=1742868887","url":"https:\/\/ocwwvb.com\/collections\/rc-tools.oembed?page=4","provider":"O'Connor Woodworking","version":"1.0","type":"link"}